scroll down


  • Remove taps easily without damaging the threads.
  • Cutting tungsten carbide or any harden steel.
  • The work head is mounted on a +/- 30 degree angle slide plate.
  • With simple easy-to-understand operating panel on controller.
  • Starting hole for wire cut edm which do not need the precision.
  • This broken tap remover is a self-contained unit, complete with dielectric pump and central cooling for electrode holder.
  • It is of portable design and its magnetic base, allows to be easily clamped on top of work piece for machining easily even on a large workpiece.

Drilling in tap center

High pressure water to flush the residues

Tap removal by needle to protect screw threads


Processing Method


  • Generator Dimensions (mm) 500 × 300 × 220
  • Generator Weight (kg) 22
  • Machine Unit Dimensions(mm) 270 × 85 × 600
  • Machine Unit Weight(kg) 7.5
  • Maximum Current Output 10A
  • Workhead travel 100mm
  • Electrode diameter Min Ø1.0mm / Max Ø6.3mm
  • Meterial of Electrode Brass or Copper electrode tube
  • Dielectric Clean Water
  • Generator Power Input AC110 or AC220V, a-Phase 50/60Hz


    Brass Electrode tubes 400mm

  • 01.Ø1.0mm x 2pcs. Ø1.5mm x 2pcs
  • 02.Ø2.0mm x 2pcs. Ø2.5mm x 2pcs
  • 03.Ø3.0mm x 2pcs. Ø3.5mm x 2pcs
  • 04.Ø4.0mm x 1pc. Ø5.0mm x 1pc
  • 05.Ø6.0mm x 1pc

    Rubber Seal

  • 01.Ø1.0mm x 2pcs. Ø2.0mm x 2pcs
  • 02.Ø3.0mm x 2pcs. Ø4.0mm x 2pcs
  • 03.Ø5.0mm x 2pcs


  • Starting holes for wire cut EDM with lower precision operations.
  • Cutting tungsten carbide or any hardened steel.